Contiki 2.5
contiki-stk501-default-init-lowlevel.c
1 /*
2  * Copyright (c) 2006, Technical University of Munich
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  * notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  * notice, this list of conditions and the following disclaimer in the
12  * documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the Institute nor the names of its contributors
14  * may be used to endorse or promote products derived from this software
15  * without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  *
29  * This file is part of the Contiki operating system.
30  *
31  * Author: Simon Barner <barner@in.tum.de>
32  *
33  * @(#)$$
34  */
35 #include "contiki-stk501.h"
36 
37 void
38 init_lowlevel(void)
39 {
40  /* Configure default slip port with 115200 baud */
41  rs232_init(RS232_PORT_0, USART_BAUD_115200, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
42 
43  /* Second rs232 port for debugging */
44  rs232_init(RS232_PORT_1, USART_BAUD_9600, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
45 
46  /* Redirect stdout to second port */
47  rs232_redirect_stdout (RS232_PORT_1);
48 }